I checked with Westin Automotive directly who confirmed the Westin Fey Diamondstep Rear Bumper # 66000 will fit your 1994 Chevrolet S-10 Blazer. The installation kit to accompany this bumper is # 97200 providing all the parts you need for the install. It is a universal kit so while they don't have one specifically designed for the 1994 S-10 Blazer, this kit will work great for you. view full answer...
To choose a weight distribution system you will need to go by the total tongue weight of the set up. This is calculated by taking the tongue weight of the trailer, when loaded and ready to tow, and adding to that the weight of anything loaded behind the rear axle of the tow vehicle.
Like you said the 800 to 1,200 pound system you have is rated much too high for a tongue weight of 278 pounds. I recommend a system that maxes out at 600 pounds, # EQ37060ET, so that it will be effective and... view full answer...
I called our representative at Reese and the hitch part number 41115 you referenced will only fit the 1975-1991 Ford Econoline E150, E250 and E350 vans.
Specifically:
1975 - 1983 Ford, E-100 Econoline Van, Full Size, All Models
1975 - 1991 Ford, E-150 Econoline Van, Full Size, All Models
1975 - 1991 Ford, E-250 Econoline Van, Full Size, All Models
1975 - 1991 Ford, E-350 Econoline Van, Full Size, All Models
The part number 41115 was made obsolete in 2006. view full answer...
The Adco Spare Tire Cover, # 290-1737, will fit the 215/70R15 spare tire of your 1987 Chevrolet S-10 Blazer.
The cover is designed to fit a 27 inch diameter tire. The spare on you Blazer measures right at 27 inches. The cover has a heavy-duty vinyl construction that will help protect the spare from the elements. view full answer...
Yes, we do have window vent shades or window air deflectors for the 1989 Chevrolet S-10 Blazer 2 Door. I have the Weather Tech Side Window Air Deflectors, part # WT80152. The Weather Tech air deflector will install in the window channel and has a dark tint. I like the Weather Tech deflectors because they are a thicker material and the installation is clean and simple.
I am including a link to the installation instructions on the Weather Tech deflectors. view full answer...
Although we don't have a hub cover that's compatible with a 5 lug on 5-1/2 inch bolt circle, I might have a solution that would dress up your wheels.
If you could reply with the diameter of the pilot opening in your wheels and the diameter of your wheel studs, you could use a Wheel Center Cap like # 319EZ. When used with some chrome lug nuts such as # 12CLN.
The center cap and lug nuts would really improve the appearance of your wheels. view full answer...
Yes, there are wiring kits available for a 1993 Chevrolet Blazer 4x4. I assume you are looking for a trailer wiring harness. If this is the case, then I recommend the Curt T-Connector Vehicle Wiring Harness, # C55319. This is a plug-in style wiring harness that connects in-line with the trucks tail light harness. The tail light harness can be found along the left rear frame rail by the bumper. I have attached the installation instructions for you to check out.
If you cannot easily access... view full answer...
The correct replacement handle for your horse trailer is going to depend on the thickness of the door as well as the size of the cutout you have. For example, if your door is 1-1/4" to 1-1/2" thick and you have a cutout of between 2-1/2" wide - 3" wide and 3-1/2" tall - 4" tall you can use the Global Link RV Entry Door Locking Latch Kit # 295-000019.
Or if your entry door is 1-1/2" thick and you have a cutout of 6" tall x 4" wide you can use the Bauer Products Rotary Latch for Horse and... view full answer...
Yes you are going to need the Replacement Quick Disconnect Crossbar Assembly for Roadmaster Tow Bars # 910021-00 with the Roadmaster Crossbar-Style Base Plate Kit # 102-1.
Additionally, to complete your flat towing setup you're going to need a tow bar # RM-522, a wiring kit # RM-15267, and a braking system # RM-9060. view full answer...
I do have a potential solution for you, but the Hopkins Wiring Harness # HM11141215 will not fit your S-10 Blazer. This will fit S-10 pickup models only.
For your S-10 Blazer I do not have any plug and play options available. Curt does make a universal splice-in kit # C58044 that we have confirmed to fit your vehicle. You would simply use the included quick splice connectors to tie in to the vehicles brake and turn signal wires.
I have linked an install video below for you to take a look at. view full answer...
To install the Hayes Blackbird Trailer Brake Controller in your 1994 Chevrolet S-10 Blazer you will use the following items in addition to the controller itself. You will need Universal Wiring Adapter # HA81789-HBC that plugs in to the back of the Blackbird and provides 4 leads for hardwired installation.
You will also use our brake controller install kit # ETBC7 which includes a 7-way socket, wiring, connectors, circuit breakers, etc. - everything you need to install the Blackbird. I... view full answer...
The Longview Custom Towing Mirrors part # LVT-1100 are a custom fit, slip-on towing mirror designed to fit a 1994 Chevrolet S-10 Blazer. Towing mirrors are designed to expand your field of view behind the vehicle while towing. The mirrors faces are adjustable which will allow you to adapt the view for your specific application. As your trailer is 7', the odds of you being able to view your trailer in these mirrors are high, however, I cannot confirm this 100% as each application will be... view full answer...
Go To Results